Our Products
Single Point Automatic Lubricators
Utilizing patented cutting edge microprocessor technology, PURSALUBE® provides the most innovative and reliable Automatic Single Point Lubricator on the market. Backed by years of research and development PULSARLUBE offers a wide rage of suerior products to meet the needs of our customers.
Accurate automatic lubrication can extend bearing life which will reduce replacement/repair cost and avoid unnecessary down times.
Automatic Lubrication System
TriboServGmbH & Co.KG simplifies the lubrication process through its reliable and cost-effective automatic lubrication systems. With its humble beginnings in Geldersheim, Germany in 2008, TriboServ has grown its market all around Europe, America, and Asia. TriboServ provides proper and accurate delivery of oil and grease specific to the machine – ensuring optimum performance and longer machine life.
Coolant Maintenance Equipment
Abanaki® offers a variety of coolant maintenance products. Machining coolants are an essential part of metalworking operations, but they are often only used a short time before being discarded.
Oil Skimmers
Abanaki® Oil Skimmers are the most inexpensive way to remove oil from water. Available as disk, belt, and tube, all oil skimers are rugged, reliable and low maintenance. Learn more about how Abanaki® Oil Skimmers work
Refractometers
Fluid Solutions, Inc. is the authorized distributor in the Philippines for Atago, the global leader for refractometer technology for over 80 years.
The first refractometers were analog and manual-optical instruments, but now they are sophisticated digital devices with accuracy levels previously thought of as impossible. The product range still includes analog models, digital handhelds, in-lines, and benchtops.
For the full list of Atago Refractometers:
Viscosity Meters
Fluid Solutions, Inc. is the authorized distributor in the Philippines for Atago, the global leader for refractormeter technology for over 80 years. In recent years, Atago has developed portable, and easy-to-use Viscosity Meters that are applicable for all fluids in Food and Beverages, Cosmetics and Pharmaceuticals. These may be adapted for use with industrial fluids such as with lubricants, too.
The Atago Viscosity Meters are known for their:
- Easy Operations
- Portability
- Accuracy
- Quick Results
pH Meters
Fluid Solutions, Inc. is the authorized distributor in the Philippines for Atago, the global leader for refractometer technology for over 80 years.
In recent years, Atago has developed a portable pH meter that embodies the design and practical elements that have made Atago refractometers such a success in the market.
Use the pH meter for all food and beverage applications, chemicals, and metal-working fluids.
The PAL DPH PH meter is portable, digital and highly accurate. Moreover, it exhibits the following benefits to the user:
- Uses an unbreakable glass probe ensuring long-life.
- Requires only three (3) drops of fluid.
- Washable without risk of damage, and,
- Can store and transmit readings
Salt Meters
Fluid Solutions, Inc. is the authorized distributor in the Philippines for Atago, the global leader for refractormeter technology for over 80 years. In recent years, Atago has developed a range of salt meters that typify all the user-advantage of Atago refractometers.
The Atago Salt Meters are known for their:
- High Accuracy – up to 2 decimal points.
- Reliability – due to its fail-proof titanium probe and IP65 rated housing,
- Portability and light-weight, and
- Ability to read hot fluids, such as soups
-
Pulsarlube V
Smart Gas Type
-
Pulsarlube E
Gas Type
-
Pulsarlube M
Electromechanical
-
Pulsarlube EXP/EXPL
Explosion-Proof
-
Pulsarlube MS & MSP
Machine Synchronized
-
Pulsarlube BT
Bluetooth Controlled
-
Pulsarlube MI
Vibration Activated
-
Pulsarlube PLC
PLC Controlled
-
Pulsarlube OL
Electromechanical Oiler
-
Pulsarlube EO
Gas Type Oiler
-
Pulsarlube S
Spring Type
Pulsarlube V Series
The Pulsarlube V automatic grease lubricator operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 125 mL/ 250 mL |
| Cartridge Type | Disposable |
| Type | Electrochemical (Nitrogen Gas) |
| Operating Pressure | up to 5 bar (73 psi) |
| Operating Temperature | -20˚C to 55˚C |
| Program | up to 12 months |
| No. of Ports | 1 |
| IP Code | IP 68 |
| Power Supply | DC 3V Battery |
Pulsarlube E Series
The Pulsarlube E is designed to offer superior advantages in cost competitiveness and user friendliness over conventional gas type SPL units. The Pulsarlube E has a creative and innovative design which satisfies a wide variety of demands for industrial applications. It operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 120 mL/ 240 mL |
| Cartridge Type | Disposable |
| Type | Electrochemical (Nitrogen Gas) |
| Operating Pressure | up to 5 bar (73 psi) |
| Operating Temperature | -20˚C to 55˚C |
| Program | up to 12 months |
| No. of Ports | 1 |
| IP Code | IP 68 |
| Power Supply | DC 3V Battery |
Pulsarlube M Series
The Pulsarlube M electromechanical automatic grease lubricator is primarily designed to compensate for the performance of conventional gas type automatic grease lubricator. It also offers superior advantages in cost competitiveness and user-friendliness.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60mL/ 125mL/ 250 mL/ 500mL |
| Cartridge Type | Replaceable |
| Type | Electromechanical |
| Operating Pressure | 30 bar (435 psi) |
| Operating Temperature | -15°C to 60°C |
| Program | Up to 24 months |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | IP 54 |
| Power Supply | DC 4.5V Battery |
Pulsarlube EXP/EXPL Series
The Pulsarlube EXP/EXPL electromechanical automatic grease lubricator is the industry's first highest explosion-proof certified in industry and can be used safely in the area classified as danger zone. The circuits and parts of the Pulsarlube EXP/EXPL are designed based on the energy limitation concept by adopting a non-sparking, explosion-proof structure that keeps an electrical device from sparking an explosive gas whether it is working under normal or certain abnormal condition.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 120 mL/ 240 mL/ 480 mL |
| Cartridge Type | Pre-set |
| Type | Electromechanical |
| Operating Pressure | 30 to 60 bar (435 to 870 psi) |
| Operating Temperature | 0°C to 50°C (EXP) -15°C to 50°C (EXPL) |
| Program | up to 12 months |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | IP 65 |
| Power Supply | DC 4.5V Battery |
Pulsarlube MS & MSP Series
The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 125 mL/ 250 mL/ 500 mL |
| Cartridge Type | Pre-set |
| Type | Electromechanical |
| Operating Pressure | 30 to 60 bar (435 to 870 psi) |
| Operating Temperature | -15˚C to 60˚C |
| Program | up to 12 months (for 60 mL to 250 mL) and 24 month (for 500 mL) |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | N/A |
| Power Supply | DC 4.5V Battery (MS) / External power supply (MSP) |
Pulsarlube BT Series
The Pulsarlube BT is a Bluetooth-enabled automatic lubricator that could be monitored and controlled via an app on a mobile device in Bluetooth range (5~20m), without physical access to the lubricators.
By incorporating Bluetooth technology, The Pulsarlube BT has been developed to meet your lubrication needs with a technological convenience never before offered.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 120 mL/ 240 mL |
| Cartridge Type | Pre-set |
| Type | Electromechanical |
| Operating Pressure | 30 to 60 bar (435 to 870 psi) |
| Operating Temperature | -15˚C to 60˚C |
| Program | up to 12 months |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | IP65 |
| Power Supply | DC 4.5V Battery |
| Bluetooth Specifications | Bluetooth 4.1 (class 2) |
Pulsarlube Mi Series
The Pulsarlube MI automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration.
If there is no vibration signal detected, the unit will automatically go into stand-by mode to avoid the problems involving over-lubrication.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 125 mL/ 250 mL |
| Cartridge Type | Replaceable |
| Type | Electromechanical |
| Operating Pressure | 30 to 60 bar (435 to 870 psi) |
| Operating Temperature | -15˚C to 60˚C |
| Program | up to 12 months |
| No. of Ports | 1 (up to 2 multi-point installation) |
| IP Code | NA |
| Power Supply | DC 4.5V Battery |
| Vibration Detector | Piezoelectric Cantilever-type Film Sensor (adjustable sensitivity range) |
Pulsarlube PLC Series
Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system.
Pulsarlube PLC is ideal for lubricating a wide variety of robots, conveyors, roller-slide bearing, motor shaft seals, generators, pumps, fans and many other linear guide systems. In case of any malfunctioning, it allows the user to manage and obtain necessary data of the lubricator remotely from a central control unit (PLC panel) without having to go on-site.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 120 mL/ 240 mL/ 480 mL |
| Cartridge Type | Pre-set |
| Type | Electromechanical |
| Operating Pressure | 30 to 60 bar (435 to 870 psi) |
| Operating Temperature | -20˚C to 60˚C |
| Program | interval or up to 12 months |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | IP65 |
| Power Supply | External Power Supply |
Pulsarlube OL500
The Pulsarlube OL500 oil lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500ml oil reservoir, and a battery pack. This product has the ability to precisely deliver very small amounts of lubricant with selectable intermittent dispensing cycle.
NOTE : The Pulsarlube OL500 is a reusable unit but the battery pack must be replaced when each dispensing period set is complete.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 500 mL |
| Cartridge Type | Refillable |
| Type | Electromechanical |
| Operating Pressure | 10 bar (145 psi) (depending on oil viscosity) |
| Operating Temperature | -15˚C to 60˚C |
| Program | up to 24 months |
| No. of Ports | 1 (up to 4 multi-point installation) |
| IP Code | IP54 |
| Power Supply | DC 4.5V Battery |
Pulsarlube EO Series
The Pulsarlube EO utilizes a mode selecting mechanism to ensure an error-free and simple operation. This product is the right choice for a cost-effective, reliable, and safe product for most industrial applications.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 60 mL/ 120 mL/ 240 mL |
| Cartridge Type | Disposable |
| Type | Electrochemical (Nitrogen Gas) |
| Operating Pressure | up to 5 bar (73 psi) |
| Operating Temperature | -20˚C to 55˚C |
| Program | up to 12 months |
| No. of Ports | 1 |
| IP Code | IP68 |
| Power Supply | None |
Pulsarlube S Series
The Pulsarlube S is an advanced spring type lubricator operates with the spring at the bottom and an upward piston movement, which dramatically reduces the effects of oil separation that have plagued traditional spring type lubricators.
Applications:
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 100 mL |
| Cartridge Type | Refillable |
| Type | Spring-type |
| Operating Pressure | N/A |
| Operating Temperature | -23˚C to 121˚C |
| Program | 5 dial settings |
| No. of Ports | 1 |
| IP Code | N/A |
| Power Supply | None |
FlexxPump Grease and Oil Lubrication Pumps
FlexxPump 1 Series
The FlexxPump 1 series is an extremely compact single point lubrication device for grease. Equipped with patented double piston pump with one lubricant outlet, the pump can be programmed with multiple strokes and has high variability of controls.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 125 cc/ 250 cc |
| Cartridge Type | Replaceable |
| Type | Electromechanical |
| Operating Pressure | up to 50 bar (700 psi) |
| Operating Temperature | -15˚C to 60˚C |
| Program | up to 12 months |
| No. of Ports | 1 (up to 8 multi-point installation) |
| IP Code | IP 54 |
| Power Supply | DC 4.5V Battery or DC 24V Power Supply |
FlexxPump 4 Series
The FlexxPump4 Series is a highly efficient microprocessor-controlled piston pump designed for specific and needs-oriented direct supply of lubrication points with grease.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 250 cc/ 400 cc |
| Cartridge Type | Replaceable |
| Type | Electromechanical |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to 140˚C |
| Program | up to 36 months |
| No. of Ports | 1 to 2 (battery and direct power supply), up to 4 (PLC) |
| IP Code | IP65 |
| Power Supply | DC 3.6V Battery, DC 24V Power Supply or PLC |
FlexxPump 1500 Series
The FlexxPump 1500 series is an automatic grease lubricator that can supply up to 10 outlets for multi-point lubrication. The pump can be controlled via PLC or on-board programming.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 1500 cc |
| Cartridge Type | Replaceable |
| Type | Electromechanical |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to 140˚C |
| Program | up to 36 months |
| No. of Ports | 2, 4, 6, 8, 10 |
| IP Code | IP54 |
| Power Supply | DC 24V Power Supply or PLC |
FlexxPump4-OIL Series
The FlexxPump4-OIL Series is a highly efficient microprocessor-controlled piston pump designed for specific and needs-oriented direct supply of lubrication points with oil.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 400 mL |
| Cartridge Type | Refillable |
| Type | Electromechanical |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to 140˚C |
| Program | up to 36 months |
| No. of Ports | 1 to 2 (battery and direct power supply), up to 4 (PLC) |
| IP Code | IP65 |
| Power Supply | DC 3.6V Battery, DC 24V Power Supply or PLC |
FlexxPump 2000
The FlexxPump 2000 series is an automatic oil lubricator that can supply up to 10 outlets for multi-point lubrication. The pump can be controlled via PLC or on-board programming.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 2000 mL |
| Cartridge Type | Refillable |
| Type | Electromechanical |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to 140˚C |
| Program | up to 36 months |
| No. of Ports | 2, 4, 6, 8, 10 |
| IP Code | IP54 |
| Power Supply | DC 24V Power Supply or PLC |
FlexxPump Accessories
FlexxMaster Control Unit
With the FlexxMaster, 4 FlexxPump4 series and/or FlexxPump4 OIL series can be centrally controlled with ease. Monitoring, programming, and operating of pumps can be done just by using the FlexxMaster.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| No. of Pump Connections | 4 |
| Operating Temperature | -20˚C to 80˚C |
| Program | individually per pump, up to 36 months |
| Power Supply | 24V DC Power Supply or PLC |
FlexxPinion/ FlexxRoll
The ideal lubrication solution for chains.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Material | Polyurethane (PU) Foam |
| Operating Temperature | -30˚C to 150˚C |
| Application | Oil |
| Size | Available in various sizes |
FlexxGear
The ideal lubrication solution for gears.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Material | Polyurethane (PU) Foam |
| Operating Temperature | -30˚C to 150˚C |
| Application | Oil |
| Size | Available in various sizes |
PA Tube
Polyamide tube
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Material | Polyamide (PA) |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to 90˚C |
| Application | Oil and Grease |
| Size | Available in various sizes |
Grease Cartridge
Replacement grease cartridges for FlexxPump1, FlexxPump 4, and FlexxPump 1500
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | 125 cc, 250 cc, 400 cc, 1500 cc |
| Grease Composition | Various, depends on grease required |
| Operating Temperature | Various, depends on grease required |
Tube Fittings
Tube fittings for lubrication ports of different sizes
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Material | Brass, Nickel Plated |
| Application | For oil and grease |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -20˚C to +90˚C |
| Size | Available in various sizes |
Splitter
Increase the number of lubrication ports per pump. Ideal for symmetrical applications like linear guides.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Number of ports | 1:2, 1:3, 1:4 |
| Application | For oil and grease |
| Operating Pressure | up to 70 bar (1000 psi) |
| Operating Temperature | -10˚C to +80˚C |
Power Supply
For FlexxPump direct power supply.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Input Voltage | 100/240V AC |
| Output Voltage | 24V DC |
Coolescer™
The Abanaki Coolescer is a must for any machine shop dealing with machine tool coolant. This unit will extend CNC coolant life, reduce disposal costs, eliminate down time, improve tool life and help prevent dermatitis.
Features:
- Leak proof fittings
- Crush resistant hose
- One year warranty
- Self contained system
- Coalescing cartridge never needs to be replaced
Chiperator™
The Chiperator is an inexpensive way to clean dirty machine sumps. The air driven Chiperator quickly separates chips and swarf from liquids. It drains or refills its 55 gallon drum in less than 2 minutes! Simply suck up coolant laden with chips, swarf and muck, and the Chiperator strains the unwanted solids. The Chiperator then pumps the strained coolant back to the sump
Features:
- Strains 40 gallons of chips and coolant per minute
- Efficient venturi design consumes less air than competitive models
- Acts as both a vacuum and a pump
- Economical, disposable filter bags make cleanup a breeze
- Filters out chips and shavings from plastic, steel, aluminum, ceramic, etc.
- Quiet; less noise than other air driven or electrical units
Q-VAC™ 100
The hard-working Q-VAC™ 100 wet vacuum thoroughly suctions all types of wet industrial spills to maintain safety and removes coolant from machine sumps for optimal equipment operation. It gets the job done quickly, quietly, and virtually maintenance-free, running on compressed air.
Features:
- Empties coolant from sump
- Vacuums oil, coolant, and other floor spills
- Removes surface decontaminates from process baths
- Empties tanks and drain pits
- Vacuums containers and vats absolutely dry
EconoMixer™
The EconoMixer is designed for speed, accuracy, and cost savings. Simply insert the unit into a 5 to 55-gallon container of coolant concentrate and connect a water line to the unit. The adjustable needle valve/dial permits any ratio required for instant uniform concentrations. The unit requires 25 pounds of water pressure to operate.
Features:
- Increased productivity of employees
- Efficient use of space
- Enhanced safety
- Maximized cleaning product performance
- More conscientious response to environmental concerns.
Coolant Mints®
Put an end to that nasty rotten egg smell in coolant.
Features:
- Safe to handle and easy to use
- Eliminates coolant odors immediately by neutralizing hydrogen sulfide gases
- Not a perfume
- No disposal problems
- Contains no formaldehyde
- Safer and less expensive than biocides
- 1 tablet per week maintains 25 gallons of coolant
- 15 tablets per tube
Belt Type
Belt Type
Oil Grabber® Model 4
Model 4 belt oil skimmers utilizes a continuous belt and wiper to remove up to 20 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 20 gph (75 lph) |
| Belt width | 4 in (10 cm) |
| Belt length | User specified (up to 100 ft) |
| Belt material | See Belt Material Selection Guide |
| Wiper | Nitrile (standard), CRV, Hybrid Ceramic |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
Belt Type
Oil Grabber® Model 8
The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, belt oil skimmers alone will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in water.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 40 gph (150 lph) |
| Belt width | 8 in (20 cm) |
| Belt length | User specified (up to 100 ft) |
| Belt material | See Belt Material Selection Guide |
| Wiper | Nitrile (standard), CRV, Hybrid Ceramic |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
Belt Type
Oil Grabber® Model MB
The Model MB oil skimmer utilizes continuous belts and wipers to remove up to 200 gallons of oil per hour from the fluid surface. The belts, operating on a motor and pulley system, run through contaminated liquid to pick up oil from the surface.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 200 gph (757 lph) |
| Belt width | 8 in (20 cm) |
| No. of belts | 2, 3, 5 |
| Belt length | User specified (up to 100 ft) |
| Belt material | See Belt Material Selection Guide |
| Wiper | Nitrile (standard), CRV, Hybrid Ceramic |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
Belt Type
Tote-It®
The Tote-It belt oil skimmer utilizes a continuous belt and wiper to remove up to 12 gallons of oil per hour from the fluid surface. The belt operates on a motor and pulley system attached to a stabilizer bar that is immersed in the contaminated liquid.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 200 gph (757 lph) |
| Belt width | 2 in (5 cm) , 4 in (10 cm) |
| Belt length | up to 10 ft |
| Belt material | See Belt Material Selection Guide |
| Wiper | Nitrile (standard), CRV, Hybrid Ceramic |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
Belt Type
Mighty Mini®
The ideal solution to unwanted oil in coolants and parts washers therefore extending the life of coolant and wash water! The Abanaki Mighty Mini SST Oil Skimmer can remove 1 to 2 gallons of medium weight oil per hour (depending on belt selection).
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 2 gph (7.57 lph) |
| Belt width | 1 in (2.5 cm), 2 in (5 cm) |
| Belt length | up to 2 ft |
| Belt material | See Belt Material Selection Guide |
| Wiper | Nitrile (standard), CRV, Hybrid Ceramic |
| Motor | 60 Hz; 220V ; single phase |
Belt Type
Grease Grabber®
The Abanaki Grease Grabber is a dependable and effective means of skimming oil and floating grease from water, under the most demanding conditions. The Grease Grabber makes use of the differences in specific gravity and surface tension between oil and water.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 160gph (606 lph) |
| Belt width | 8 in (20 cm) |
| Belt length | User specified (up to 100 ft) |
| Belt material | See Belt Material Selection Guide |
| Wiper | Hybrid Ceramic |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
Belt Type
Oil Concentrator®
The Abanaki Oil Concentrator performs as a virtually complete oil water separator for recycling or disposal of either liquid. The result is water (or coolant) available for recycling, and virtually water-free oil for disposal.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Capacity | OC-200 for Model MB (17 gallons/ 64.4 liters); OC-100 for Model 4 and Model 8 (2.5 gallons/ 9.5 liters) DM-100 for Tote-It and Mighty Mini (0.56 gallons/ 2.1 liters) |
| Material | steel weldments and corrosion-resistant coating (OC-100 and 200); fiberglass (DM-100) |
| Mounting Method | Supplied by Abanaki |
Belt Material Selection Guide
| Corrosion Resistant | Elastometric | PolyBelt | Poly XP | Poly HT | Fuzzy | |
| Temp | Up to 66°C | 10 to 60°C | -10 to 77°C | Up to 66°C but okay for 100°C peak | Up to 100°C without stretching | Up to 77°C |
|---|---|---|---|---|---|---|
| pH | 3 to 13 | 3 to 13 | 3 to 13 | 3 to 13 | 3 to 13 | 3 to 13 |
| Resistance to Fines and Solids | Yes | Yes/Excellent | Yes | Yes | Yes | Yes |
| Remarks 1 | Standard | Excellent Oil Attraction | For longer belt length application | Resistant to Flexing | For harsh basic or acid exposure | Picks up gas, diesel, jet fuel, etc. |
| Remarks 2 | Long Lasting | UV Sensitive | Picks-up floating emulsions | Not resistant to acids |
Filter Type
Oil Boss®
"The Oil Boss coolant skimmer pumps oil-laden fluid from the sump through a chip-blocking pre-filter to the inlet valve. From there, it passes through coalescing media that separates the oil from the coolant. Clean coolant returns to the sump. Skimmed oil is held in a containment area until the operator easily removes the oil via the discharge tap.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Pump | up to 300 gph (1,136 lph) |
| Dimensions | 19.5" x 16" x 6" |
| Motor | 50Hz or 60 Hz; 110V or 220V |
| Models Available | Electric, Pneumatic |
Tube Type
Oil Viper®
The Abanaki Oil Viper tube skimmer is a surface oil skimmer that effectively removes floating surface oils by means of an oleophilic (oil attracting) 3/4 inch diameter continuous looped tube. The tube extends out over the surface of the tank or pit and collects the free floating oils.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Removal Rate | up to 100 gph (378 lph) |
| Tube Diameter | 3/4 in (1.9 cm) |
| Tube length | up to 60 ft reach |
| Tube material | Ester, Tygon (for coolant) |
| Motor | 50Hz or 60 Hz; 220V or 440V; 3 phase or single phase |
PAL Digital Handheld Refrectometer
Master Traditional Analog Refrectometer
PEN Dip Type Refrectometer
Palette Portable Benchtype Refrectometer
QR Suction Type Refrectometer
RX-I Touchscreen Model Refrectometer
RX-α Long Seller Model Refrectometer
DD-7 Differential Refractometer
Abbe Traditional Refrectometer
DR-M Multi-Wavelength Abbe Refrectometer
CM-800α Most Popular Refrectometer
CM-BASEα Certified by RRI Refrectometer
PRM High Accuracy Refrectometer
PAN Hook Type for Tank/Pot Refrectometer
CM-BASEβ Hook Type for Tank/Pot Refrectometer
Piccolo IoT Sensor Hub Refrectometer
Digital Viscosity Meter
Digital Viscometer VISCO™-895
By changing the material used for body, legs and stand to alminium, unit weight is now 895g as described in the model name. Appearance and all features remain unchanged, while achieving 25% weight reduction compared to existing VISCO™.
| Specifications | Descriptions |
|---|---|
| Model | VISCO™-895 |
| Cat. No. | 6820 |
| Measurement item | Viscosity ・ Temperature ・ Torque% |
| Range | Viscosity： A1 50 to 200,000mPa・s / 50 to 200,000cP A2 100 to 600,000mPa・s / 100 to 600,000cP A3 500 to 2,000,000mPa・s / 500 to 2,000,000cP UL 1～2,000mPa・s Torque：0.0 to 100.0％ (recommended torque: 10.0 to 100.0％) |
| Speed | 0.5 to 250rpm Number of Speeds: 20 |
| Accuracy | Viscosity: ±1% of Maximum Viscosity (Refer to the "Maximum Measurement Values Guideline Chart," from p.34) Temperature: ±0.2°C |
| Power Supply | LR6 / AA alkaline batteries (x4) AC adapter |
| Computer Communication | Output: USB - PC |
| Dimensions & Weight | Main unit：120(W) ｘ 120(D) ｘ 200.6(H)mm / 0.895kg |
Digital Viscometer VISCO™
Compact and easily carried with one hand.
Battery operated—measurements can be taken anywhere.
Fully digital display allows for anyone to easily read results.
Capable to measure with only a small amount of sample.
Easy set-up and simple, one-button operation.
Capable of taking measurements with containers other than the included beakers, such as disposable paper cups.
Ultra Low Adapter will allow to measure low viscosity samples (1～2,000mPa・s).
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | VISCO™ |
| Cat. No. | 6800 |
| Measurement item | Viscosity ・ Temperature ・ Torque% |
| Range | Viscosity： A1 50 to 200,000mPa・s / 50 to 200,000cP A2 100 to 600,000mPa・s / 100 to 600,000cP A3 500 to 2,000,000mPa・s / 500 to 2,000,000cP UL 1～2,000mPa・s Torque：0.0 to 100.0％ (recommended torque: 10.0 to 100.0％) |
| Speed | 0.5 to 250rpm Number of Speeds: 20 |
| Resolution | Viscosity： Lower than 100mPa･s：0.01mPa･s 100mPa･s or higher lower than 10,000mPa･s：0.1mPa･s 10,000mPa･s or higher：1mPa･s Torque： Lower than 10.0%：0.01% 10.0% or higher：0.1% Temperature：01°C/0.1°F |
| Accuracy | Viscosity: ±1% of Maximum Viscosity Temperature: ±0.2°C |
| Power Supply | LR6 / AA alkaline batteries (x4) AC adapter |
| Computer Communication | Output: USB - PC |
| Dimensions & Weight | Main unit：120(W) ｘ 120(D) ｘ 2006(H)mm / 1.2kg |
Digital viscometer VISCO™ B (L)
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | VISCO™ B (L) |
| Cat. No. | 6840 |
| Measurement item | Viscosity(mPa・s/cP) Temperature(°C/°F) Torque(％) |
| Range | Viscosity：12～60,000,000mPa･S、12～60,000,000cP L1 12～600,000mPa ･S、12～600,000cP L2 30～3,000,000mPa･S、30～3,000,000cP L3 48～12,000,000mPa･S、48～12,000,000cP L4 240～60,000,000mPa･S、240～60,000,000cP Torque：recommended torque: 10.0 to 100.0％ Temperature: 0.0～100.0°C、32.0～212.0°F |
| Accuracy | Viscosity: ±1% of Maximum Viscosity Temperature: ±0.2°C、±0.4°F |
| Power Supply | LR6 / AA alkaline batteries (x4) AC adapter |
| Computer Communication | Output: USB - PC |
| Dimensions & Weight | φ240 × (H)398mm 4.2kg |
Digital pH Meter
Digital Hand-held PAL-pH
Pocket pH meter is very new which is droplet type pH meter. It only needs simple operation by a small amount of sample. It can be used widely from food and beverage such as soil, water-soluble cutting oil, alkaline cleaning liquid.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-pH |
| Cat. No. | 4311 |
| Range | pH0.00～14.00 |
| Resolution | pH0.01 |
| Accuracy | pH±0.10 |
| Calibration | Calibration at 3 points at 4.01, 6.86, 9.18. |
| Temperature compensation | 10 to 40ﾟC |
| Sample Volume | 0.6mL |
| Power Supply | Size AAA alkaline battery × 2 |
Digital pH Meter DPH-2
ATAGO is proud to introduce our new digital pH meter, DPH-2. Like all ATAGO products, the DPH-2 is extremely easy to use. It has a compact, portable design and is water resistant (IP67), so it can be cleaned under running water and submersed into water without any negative effects. It has an Automatic Temperature Compensation mechanism that function from 0 to 50°C. With these features, the DPH-2 is perfect for many different applications including food and beverage production control, brewing and fermentation, soil and hydroponics, cutting oils, alkali washing liquids, and other soluble solutions. Great Features at Great Price.
*Calibrate at 3 points (4.0, 7.0 and 10.0).
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | DPH-2 |
| Cat. No. | 4320 |
| Range | 0.0 to 14.0pH |
| Resolution | 0.1pH |
| Accuracy | ± 0.1pH (2.0 to 12.0pH) |
| Temperature compensation | 0.0 to 50.0°C |
| Power Supply | Watch battery (LR44) × 4 |
Digital Salt Meter
Digital Hand-held "Pocket" SALT METER PAL-SALT
PAL-SALT is widely used in various industries for food and industrial solutions. For food products, in addition to checking salt content, salt meter is used to make sure salt is properly added and not forgotten for such product as bread, rice balls and frozen. For industrial use, salt meter is widely used for salt resistance test for cars and such.
*Offset feature use examples
#1. Program a dilution factor to display the original salt%
#2. Program a conversion factor to align the readings with titration methods.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-SALT |
| Cat. No. | 4250 |
| Scale | Salt concentration (g/100g) Temperature |
| Method | Conductivity method |
| Range | 0.00 to 10.0% (g/100g) |
| Resolution | 0.01% for salt concentration of 0.00 to 2.99% 0.1% for salt concentration of 3.0 to 10.0% |
| Accuracy | Displayed value ±0.05% (for salt concentration of 0.00 to 0.99%) Relative precision ±5% (for salt concentration of 1.00 to 10.0%) |
| Sample temp. | 5 to 100°C |
Digital Hand-held "Pocket" SALT METER PAL-SALT Mohr
PAL-SALT Mohr gives a reading similar to those obtained from the Mohr’s method (titration). Like other ATAGO salt meters, PAL-SALT Mohr utilizes conductivity to measure samples. This unit also features an offset function which allows for readings to be compensated based on known standards.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-SALT Mohr |
| Cat. No. | 4251 |
| Scale | Salt concentration (g/100mL) Temperature |
| Method | Conductivity method |
| Range | 0.00 to 10.0% (g/100mL) |
| Resolution | 0.01% for salt concentration of 0.00 to 2.99% 0.1% for salt concentration of 3.0 to 10.0% |
| Accuracy | Displayed value ±0.05% (for salt concentration of 0.00 to 0.99%) Relative precision ±5% (for salt concentration of 1.00 to 10.0%) |
| Sample temp. | 5 to 100°C |
Digital salt-meter ES-421
The digital salt-meter, ES-421 employs a funnel-shaped sensor which measures the salt % of a sample such as the dilute solution of soy sauce, ketchup,mayonnaise, worcester sauce, squeezed juice of pickles, etc. It only needs 1.0ml of sample.
*Improved durability with titanium electrodes.
*Stage is made out of SUS316L.
*Equipped with a backlight for even brighter, easier to read display.
*Equipped with an “Offset Function.”
*The NaCl solution for calibration is different from the solution used for the former ES-421(Cat.No4210).Its concentration has been changed from 2.84%→2.50%.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | ES-421 |
| Cat.No. | 4211 |
| Scale | Salt concentration (g/100g) Temperature |
| Method | Conductivity method |
| Range | 0.00 to 10.0% |
| Resolution | 0.01% for salt concentration of 0.00 to 2.99% 0.1% for salt concentration of 3.0 to 10.0% |
| Accuracy | Displayed value ±0.05% (for salt concentration of 0.00 to 0.99%) Relative precision ± less than 5% (for salt concentration of 1.00 to 10.0%) |
| Ambient Temperature | 10 to 40°C (Automatic Temperature Compensation) |
| Power Supply | 006P Dry battery (9V) |
| Dimensions & Weight | 17×9×4cm, 220g (Main Unit only) |
Dried fish Salt-meter PAL-FM1
The PAL-FM1 features convenient operation of direct measuring of salt in dried fish by the probe. It only takes 3 seconds to measure. However, measurements at different locations may be inconsistent, and such direct measurements may vary from measurements by dilution methods.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-FM1 |
| Cat.No. | 4221 |
| Scale | Dried fish salt % Temperature |
| Range | 0.0～10.0% (Automatic Temperature Compensation) |
| Resolution | 0.1% |
| Power Supply | 2 × AAA Batteries |
| International Protection Class | IP65 Water resistant |
| Dimensions & Weight | Main Unit:55(W)×31(D)×109(H)mm Electrode probe : Φ15×570mm (Cable length : applox.400mm) |
Digital Hand-held “Pocket” Salt-meter PAL-SALT PROBE
The PAL-SALT PROBE features convenient operation of submerging the probe in a liquid for measuring the salt content in as fast as 3 seconds. The probe may be inserted directly into semi-solid food. However,measurements at different locations may be inconsistent,and such direct measurements may vary from measurements by dilution methods.
・Electrode pins have extended from 5mm to 10mm for easier measurement.
・Screen now features a backlight for an easier to read
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-SALT PROBE |
| Cat.No. | 4222 |
| Scale | Salt concentration (g/100g) |
| Method | Conductivity method |
| Range | 0.00 to 7.0% |
| Resolution | 0.01% (0.00 to 1.99%) 0.1% (2.0 to 7.0%) |
| Accuracy | ± 0.1% (0.00 to 1.99%) Relative precision : ± 5% (2.1 to 5.0%) Relative precision : ± 10% (5.1 to 7.0%) |
| Power Supply | 2 × AAA Batteries |
| International Protection Class | IP65 Water resistant |
| Dimensions & Weight | Main Unit : 55(W)×31(D)×109(H)mm, 100g Electrode probe : Φ15×570mm (Cable length : applox.400mm) |
| Included Accessories | NaCl Solution 2.5% (30mL) : RE-143025 |
"Pocket" Salt-meter PAL-Easy SALT
Professional salinity meter that can easily control salinity with high accuracy. It is the only titanium electrode in the world and durability is outstanding.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-Easy SALT |
| Cat.No. | 4101 |
| Range | Sodium Chloride：0.0 to 10.0% |
| Minimum Indication | 0.01% (up to 2.99% salt) 0.1% (above 3.00% salt) |
| Accuracy | ±0.05% (up to 0.99%) Relative precision of ±5% above 1.00%) |
| Temperature compensation | 5 to 100°C |
Seawater meter PAL-Fish Tank
This model is for measuring the salinity in seawater.
The only one model in the world adopt the titanium as an electrode.
It is resistant to scratches and has much durability.
Technical Specifications:
| Specifications | Descriptions |
|---|---|
| Model | PAL-Fish Tank |
| Cat.No. | 4121 |
| Range | Salinity:0.0 to 45.0‰ |
| Minimum Scale | 0.1‰ |
| Accuracy | ±2.0‰ |
