Automatic Single Point Lubricators

Pulsarlube V Series

The Pulsarlube V automatic grease lubricator operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy.

Applications:

Pulp and Paper Steel Mills Cement Blowers Electric Motors

Technical Specifications:

Specifications Descriptions
Capacity 125 mL/ 250 mL
Cartridge Type Disposable
Type Electrochemical (Nitrogen Gas)
Operating Pressure up to 5 bar (73 psi)
Operating Temperature -20˚C to 55˚C
Program up to 12 months
No. of Ports 1
IP Code IP 68
Power Supply DC 3V Battery
Pulsarlube E Series

The Pulsarlube E is designed to offer superior advantages in cost competitiveness and user friendliness over conventional gas type SPL units. The Pulsarlube E has a creative and innovative design which satisfies a wide variety of demands for industrial applications. It operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy.

Applications:

Cement Pulp and Paper Mining Conveyors Water Utility and Treatment

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 120 mL/ 240 mL
Cartridge Type Disposable
Type Electrochemical (Nitrogen Gas)
Operating Pressure up to 5 bar (73 psi)
Operating Temperature -20˚C to 55˚C
Program up to 12 months
No. of Ports 1
IP Code IP 68
Power Supply DC 3V Battery
Pulsarlube M Series

The Pulsarlube M electromechanical automatic grease lubricator is primarily designed to compensate for the performance of conventional gas type automatic grease lubricator. It also offers superior advantages in cost competitiveness and user-friendliness.

Applications:

Pump Steel Mills Power Plant Electric Motors Cooling Towers

Technical Specifications:

Specifications Descriptions
Capacity 60mL/ 125mL/ 250 mL/ 500mL
Cartridge Type Replaceable
Type Electromechanical
Operating Pressure 30 bar (435 psi)
Operating Temperature -15°C to 60°C
Program Up to 24 months
No. of Ports 1 (up to 8 multi-point installation)
IP Code IP 54
Power Supply DC 4.5V Battery
Pulsarlube EXP/EXPL Series

The Pulsarlube EXP/EXPL electromechanical automatic grease lubricator is the industry's first highest explosion-proof certified in industry and can be used safely in the area classified as danger zone. The circuits and parts of the Pulsarlube EXP/EXPL are designed based on the energy limitation concept by adopting a non-sparking, explosion-proof structure that keeps an electrical device from sparking an explosive gas whether it is working under normal or certain abnormal condition.

Applications:

Petrochemical Power Plant Electric Motors

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 120 mL/ 240 mL/ 480 mL
Cartridge Type Pre-set
Type Electromechanical
Operating Pressure 30 to 60 bar (435 to 870 psi)
Operating Temperature 0°C to 50°C (EXP)
-15°C to 50°C (EXPL)
Program up to 12 months
No. of Ports 1 (up to 8 multi-point installation)
IP Code IP 65
Power Supply DC 4.5V Battery
Pulsarlube MS & MSP Series

The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.

Applications:

Electronics Robots

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 125 mL/ 250 mL/ 500 mL
Cartridge Type Pre-set
Type Electromechanical
Operating Pressure 30 to 60 bar (435 to 870 psi)
Operating Temperature -15˚C to 60˚C
Program up to 12 months (for 60 mL to 250 mL) and 24 month (for 500 mL)
No. of Ports 1 (up to 8 multi-point installation)
IP Code N/A
Power Supply DC 4.5V Battery (MS) / External power supply (MSP)
Pulsarlube BT Series

The Pulsarlube BT is a Bluetooth-enabled automatic lubricator that could be monitored and controlled via an app on a mobile device in Bluetooth range (5~20m), without physical access to the lubricators.

By incorporating Bluetooth technology, The Pulsarlube BT has been developed to meet your lubrication needs with a technological convenience never before offered.

Applications:

Petrochemical Power Plant Pump Electric Motors Cooling Towers

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 120 mL/ 240 mL
Cartridge Type Pre-set
Type Electromechanical
Operating Pressure 30 to 60 bar (435 to 870 psi)
Operating Temperature -15˚C to 60˚C
Program up to 12 months
No. of Ports 1 (up to 8 multi-point installation)
IP Code IP65
Power Supply DC 4.5V Battery
Bluetooth Specifications Bluetooth 4.1 (class 2)
Pulsarlube Mi Series

The Pulsarlube MI automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration.

If there is no vibration signal detected, the unit will automatically go into stand-by mode to avoid the problems involving over-lubrication.

Applications:

Pump Conveyors Electric Motors

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 125 mL/ 250 mL
Cartridge Type Replaceable
Type Electromechanical
Operating Pressure 30 to 60 bar (435 to 870 psi)
Operating Temperature -15˚C to 60˚C
Program up to 12 months
No. of Ports 1 (up to 2 multi-point installation)
IP Code NA
Power Supply DC 4.5V Battery
Vibration Detector Piezoelectric Cantilever-type Film Sensor (adjustable sensitivity range)
Pulsarlube PLC Series

Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system.

Pulsarlube PLC is ideal for lubricating a wide variety of robots, conveyors, roller-slide bearing, motor shaft seals, generators, pumps, fans and many other linear guide systems. In case of any malfunctioning, it allows the user to manage and obtain necessary data of the lubricator remotely from a central control unit (PLC panel) without having to go on-site.

Applications:

Automotive Robots

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 120 mL/ 240 mL/ 480 mL
Cartridge Type Pre-set
Type Electromechanical
Operating Pressure 30 to 60 bar (435 to 870 psi)
Operating Temperature -20˚C to 60˚C
Program interval or up to 12 months
No. of Ports 1 (up to 8 multi-point installation)
IP Code IP65
Power Supply External Power Supply
Pulsarlube OL500

The Pulsarlube OL500 oil lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500ml oil reservoir, and a battery pack. This product has the ability to precisely deliver very small amounts of lubricant with selectable intermittent dispensing cycle.

NOTE : The Pulsarlube OL500 is a reusable unit but the battery pack must be replaced when each dispensing period set is complete.

Applications:

Conveyors

Technical Specifications:

Specifications Descriptions
Capacity 500 mL
Cartridge Type Refillable
Type Electromechanical
Operating Pressure 10 bar (145 psi) (depending on oil viscosity)
Operating Temperature -15˚C to 60˚C
Program up to 24 months
No. of Ports 1 (up to 4 multi-point installation)
IP Code IP54
Power Supply DC 4.5V Battery
Pulsarlube EO Series

The Pulsarlube EO utilizes a mode selecting mechanism to ensure an error-free and simple operation. This product is the right choice for a cost-effective, reliable, and safe product for most industrial applications.

Applications:

Conveyors

Technical Specifications:

Specifications Descriptions
Capacity 60 mL/ 120 mL/ 240 mL
Cartridge Type Disposable
Type Electrochemical (Nitrogen Gas)
Operating Pressure up to 5 bar (73 psi)
Operating Temperature -20˚C to 55˚C
Program up to 12 months
No. of Ports 1
IP Code IP68
Power Supply None
Pulsarlube S Series

The Pulsarlube S is an advanced spring type lubricator operates with the spring at the bottom and an upward piston movement, which dramatically reduces the effects of oil separation that have plagued traditional spring type lubricators.

Applications:

Pump Blowers

Technical Specifications:

Specifications Descriptions
Capacity 100 mL
Cartridge Type Refillable
Type Spring-type
Operating Pressure N/A
Operating Temperature -23˚C to 121˚C
Program 5 dial settings
No. of Ports 1
IP Code N/A
Power Supply None

Communicate with our
lubrication consultants!