Lubricating and Maintenance Aids
Multi-Purpose Oil Spray
The Loctite ML-11 is formulated as a Penetrating Oil, Rust Inhibitor, Dewatering Agent and All-around Lubricant. With a mild cherry scent, the Loctite ML-11 may be used without detrimental effect to all metals, plastics, and rubbers. In 360 ml spray cans.
Safety Electrical Contact Cleaner
The Loctite 7039 is an Electrical & Electronics Contact Cleaner that does not affect any components and varnishes. It is quick-drying in nature, and removes and moisture and contamination on electrical and electronic contacts. It may be in applications up to 50oC, and importantly, it leaves an invisible and undetectable film that repels water for protection. In 360 ml spray cans.
Dry Teflon Spray
Syntech’s Dry PTFE Spray is a white, solid, dry, tenacious and non-toxic film sprayed into guides, chutes, pins, cams and slides. Usable for temperatures of up to 270oC, use the Dry PTFE ensures a clean, non-stick lubricating condition at all times. In 400 ml cans.
Dry Moly Spray
Syntech’s Dry Moly spray is a black, solid, dry, tenacious and wear-resistant film sprayed into plain bearings, guides, chutes, pins, cams, slides, ejector pins and other applications wherein fluid oils and greases are not applicable. It may used in temperatures up to 450oC, and prevents the pick-up of contaminants. May also be used as an anti-seize agent. In 400 ml cans.
Heavy Duty Degreaser
The Syntech HD Degreaser cuts through oils, grease, grime, sludges, waxes and other deposits that are difficult to wash off by conventional methods. Simply spray on the surfaces affected, and allow the fluid to soak for a few minutes before wiping or washing off the contaminants with water. For heavier contamination, allow the fluid to soak for a longer duration. Safe for all substrates. In 400 ml cans.
Food Grade High Performance Spray Oil
The Syntech Food Multi-Spray is an NSF H1 rated Lubricant for use in chains, links, pins, pivots, small bearings and other metal components that may have incidental contact with food stuffs. It may also be used as a Penetrating Oils, Rust Preventive and a Dewatering Agent. Fully synthetic in nature, it is highly resistant to water and may applied to temperatures of up to 270oC. In 400 ml cans.
High Performance Spray Grease
Syntech’s Ruby Spray Grease is a Lithium Complex Grease fortified with PTFE in order to withstand high temperatures and extreme loads. It does not leave sticky or gummy residues, and provides excellent corrosion protection. Use at temperatures of up to 220oC and up to speed factors of 750,000. In 400 ml cans.
Silicone Mould Release Agent
Syntech Silicone Spray provides a fast, efficient, and clean release in complex moulding operations, especially on plastics. The silicone oil in the formulation ensures a wet film even at 200°C, and a glossy finish is typically achieved. Difficulties at start-up are minimized using Silicone Mould Release Agent. Available in 400 ml cans.
Non-Silicone Mould Release Agent
Syntech Non-Silicone Spray is for use when silicone or PTFE based fluids are not preferred in the moulding process. Recommended for plastic or rubber molded parts that undergo printing or painting in the subsequent process. Non-Silicone Mould Release Agent produces a wet film that resists temperatures of up to 150°C, and is highly helpful for applications using Polypropylene, Expanded Polystyrene, Nylon A100 and Nitrile Rubbers. Available in 400 ml cans.
Tapping Compounds & Fluids
For hand-applied machining, especially for tapping, reaming and drilling, Syntech Procut Liquid and Compound reduces the frictional forces in the cutting process, and reduces temperatures. In effect, tool life is prolonged, while surface finish is at an optimum. The products are safe for non-ferrous metals and especially formulated for hard steels including Stainless Steels and Inconel. Apply on the cutting tool by brush or dipping. In 400 ml cans.
Tacbecon’s S1100 is a paste with fine copper particles applied on threaded components such as large bolts and nuts to prevent seizure, stress-cracking, and corrosion. It also reduces dismantling torque significantly, prolonging the life of machine components. Apply on the threaded assembly after cleaning, by brush. May be used up to 1,000oC. In 500 gram jars.