Steels
Steels
Fluid Solutions, Inc. and Condat (France) has a full and complete range of both Na and Ca-based soaps and powders for all Ferrous Wire Drawing, be it for low-speed, or high speed processes.
| Low Carbon | High Carbon | Alu Clad | Galvanized | Stainless Steel | Copper Alloys | Aluminum Alloys | ||||||
| Mech. Descaled | Acid-pickled and Precoated | Mech. Descaled | Acid-pickled and Precoated | |||||||||
|
VICAFIL
|
Calcium Soap Based Lubricants
|
CROCUS – X2 – TF 4407 |
• | • | • | Versatile for medium reductions and speeds. | ||||||
TF 132 – TF 1562 |
• | Wire to be galvanised, low residues. | ||||||||||
DECAL 6C0 -TF 44 – TF 812 DECAL 440 |
• | • | High lubricant pickup. | |||||||||
TF 239 |
• | • | High lubricant pickup. Easy to remove | |||||||||
X4 |
• | • | • | High speed drawing. Low consumption. Low dust. | ||||||||
TF 1392 – X8* |
• | • | • | • | High lubricant pick-up. Very high speed drawing. | |||||||
TF 1651 |
• | • | • | Redrawing : first drafts | ||||||||
TF 1269 |
• | • | • | High speed drawing. Very good adherence. Low residues | ||||||||
TT 120 – TF 3738 – DR |
• | • | PC wire. Low dust and clean finish. | |||||||||
CAULIS – CANTOR 60 |
• | • | • | • | Clean finish. | |||||||
TF 1202 – TF 1669 – TF 1869 |
• | • | • | Galvanised wire. Spring wire. Very good adherence. | ||||||||
LM 935 – LM 1120 – LAM 446 |
• | Cold rolling. Very low consumption. | ||||||||||
|
Sodium Soap Based Lubricants
|
TN 4543 |
• | • | Clean finish. Few drafts. High reductions. | ||||||||
SPM 3 W – TN 3851 * |
• | • | Good drawing ability. Good cleaning ability. | |||||||||
TN 3952 |
• | Few reductions. 100% soluble in water : plating quality. | ||||||||||
TN 1 700 |
• | • | • | • | • | Very high adherence. High lubricant pickup. | ||||||
TN 1524 |
• | • | • | High speed drawing. First reductions. High cleaning ability. | ||||||||
TN 1548* – TN 1678 |
• | • | • | First drafts instead of a calcium soap. Ex : CO2 Wire. | ||||||||
TN 2693 – TN 1948 * |
• | • | • | Redrawing. Very good surface quality (Ex: spring wire). | ||||||||
SALVIA 5 – TN 1180 |
• | • | • | • | • | General use redrawing. Very clean finish. | ||||||
SUMAC 3* – SANTALE 6 – SUMAC class=”dot”5• |
• | • | • | • | • | • | High performance requirements. | |||||
TN 3774 |
• | • | CO2 Wire | |||||||||
TN 21 – TN 1973 |
• | • | • | • | High speed drawing. Fine wire. | |||||||
SECALE – TN 3785 |
• | • | • | • | Bright and clean finish. | |||||||
TN 4392 – TN 1012 – SPS 99 |
• | • | • | Low speed drawing. Bright and clean finish. | ||||||||
|
Steelskin
|
Specialty Lubricants
|
3814 – 2408 |
• | • | • | Cold heading wire. Low residues. | ||||||
99 MO – 1091 |
• | • | Cold heading wire. Low residues. High tool life. | |||||||||
OBG 3 |
• | • | Aluminised steel (Alu clad) | |||||||||
121 – 4165 |
• | PC wire. | ||||||||||
366 |
• | High drawing ability combined with a sodium soap | ||||||||||
DR |
• | • | Redrawing. High pick-up. | |||||||||
5890 – 1670 |
Flux cored wire. | |||||||||||
1629 |
• | • | Black finish | |||||||||
4Z |
• | Flux cored wire. | ||||||||||
3150 |
• | • | • | Synthetic dry lubricant | ||||||||
Powder GF |
• | • | • | Additive. Synthetic graphite. | ||||||||
